Key Features & Specs
- Used with the W200 Series Self-Propelled Windrower traction units
- 5 m (16 ft.) cutting width
- Overshot cross auger improves windrow formation and dry down time
- Open-face converging drum design improves convergence from edges of platform creating consistent, even windrows
Specifications
Dimensions
| Windrower width (depending on crop conditions) | With roll conditioner 914 to 2159 mm 36 to 85 in. |
| Overall width (transport) | 5 m 16, 3 ft, in. |
| Cutting height | 17 to 178 mm 0.6 to 6.7 in. |
| Cutting width | 5 m 16, 0 ft, in. |
| Weight | With fluted steel conditioner 4790 lb With urethane conditioner 4551 lb With Tri-Lobe conditioner 4991 lb |
Key Specs
| Compatibility | R450, W235, W260 |
| Cutting width | 5 m 16 ft |
| Cutting height | 17 to 178 mm 0.6 to 6.7 in. |
| Weight | With fluted steel conditioner 2173 4790 lb With urethane conditioner 2064.3 kg 4551 lb With Tri-Lobe conditioner 2264 kg 4991 lb |
| Overall width (transport) | 5 m 16.25 ft |
Steel conditioner rolls
| Material | Steel |
| Surface | Intermeshing flutes |
| Speed | 1000 rpm |
| Diameter | 254 mm 10 in. |
| Width | 2692 mm 106 in. |
Urethane conditioner rolls
| Material | Urethane |
| Surface | Intermeshing, intermittent recessed cleats |
| Speed | 1000 rpm |
| Diameter | 254 mm 10 in. |
| Width | 2682 mm 106 in. |
Windrower
| Compatibility | R450, W235, W260 |
| Formation | Adjustable swath board and adjustable forming shields |

