Specifications

Cutterbar

Adjustable gauge shoes Yes
Angle adjustment Manual or hydraulic
Number of knives 10
Lubrication Hy-Gard oil
Number of disks 5
Type John Deere
Disk drive Gear
Disk speed 2,650 rpm
Cutterbar protection ShearHub
Angle range 2-8 degree (angle)
Cutterbar oil check Combination check, drain plug
Cutting width 2.4 m
8.1 ft
Oil reservoir capacity 5.7 L
6 U.S. qt
Knife tip speed 307 km/h
191 mph
Cutting height 2.8-9.8 cm
1.1-3.8 in.

Dimensions

Transport width 2.4 m
8.1 ft
Weight, impeller conditioner 2,027 kg
4,470 lb
Standard tires 11L-15 standard, 31x13.5L 15 optional
31x13.5L 15 optional
Transport length 6.2 m
20.6 ft

Impeller conditioner

Tines type V-tines
Number of tines 33
Drive 3-V powerband belt and sheaves
Number of speeds Two
Width 140 cm
55.2 in.
Diameter 59.4 cm
23.4 in.

Key Specs

Optional hitch Equal angle
Standard hitch Clevis
PTO speed 540 rpm
Number of disks/knifes 5
10
Hydraulic pressure required 13,790 kPa
2,000 psi
Cutterbar - cutting width 2.4 m
8.1 ft
Transport width 2.4 m
8.1 ft

Power requirements

PTO speed 540 rpm
1000 rpm
540 rpm PTO 55-75 hp
41-56 kW

Tractor equipment

Tractor connection 21 spline
Optional hitch Equal angle
Standard hitch Clevis
Hydraulic pressure required 13,790 kPa
2,000 psi

Additional information

Date collected August 24, 2020