LW12 Series In-Line Bale Wrapper
- John Deere
- Handling Equipment (Hay & Forage)
Find Your Nearest Location
Key Features & Specs
- Bale push is integrated into machine
- Wrapping cycle shuts down when out of film
- 120 bales per hour
- Central control box operates all hydraulic functions
- Wrapping Capacity 120 bales / hr
- Bale Capacity 5 ft. 6 in. (1.7 m) round; 3 x 3 x 5 ft. 6 in. (.9 x .9 x 1.7 m) square
- Power 13 hp (9.7 kW)
- + Expand All
- - Close All
-
Control box and levers are control center of machine
The control box and levers are the control center of the in-line bale wrappers.
Some of the uses include turning the unit on and off, and controlling the bale ramp and bale push.
-
Traction implement tires great on wet and uneven terrain
Traction implement tires make the in-line wrappers sure-footed on wet and uneven terrain to help get the machine where it needs to be for wrapping bales.
The LW11 Series comes standard with the traction implement tires, and they are available on the LW12 Series only when ordered with single- or dual-power drive.
-
Film wrap sensor shuts down wrapping cycle when out of film
The film wrap sensor automatically shuts down the wrapping cycle when the machine runs out of film or breaks.
-
Quick-start power jack for LW1266 Bale Wrappers
The quick-start power jack conversion kit lifts the bale wrapper to level the roller bed when starting a new bale line on the LW1266 In-Line Bale Wrappers.
-
Options available to increase productivity and uptime
14.9-kW (20-hp) Honda® engine
A larger horsepower engine with a high-flow pump provides increased capacity to complete the job faster.
NOTE: LW Series In-Line Bale Wrappers come standard with a 9.7-kW (13-hp) Honda engine.Single- and dual-power drive
Optional single- or dual-power drives allow the operator to maneuver the unit without attaching it to a tractor. The single-power drive has one rear tire, while the dual-power drive has two rear tires, to provide traction for the unit. These features are great for wet or uneven ground conditions where traction is limited.
Steering remote control
This remote control allows the operator to steer, start, and stop the machine without using the control panel on the machine.
Twin wrap kit
This kit provides a double layer of wrap, increasing the amount of wrap applied to bales.
Work lights
For early morning or late-night work, choose between two optional work lights: light-emitting diode (LED) and halogen.
Guide rollers
Optional guide rollers help keep the bales on the bale ramp in uneven terrain.
Power jack
The optional power jack hydraulically raises the bale ramp to a level position to eliminate air pockets between bales when starting a row. The bale ramp is lowered after three bales have been wrapped.
Bale Follower
The bale follower allows the in-line wrapper to automatically follow the line of bales next to it.
Honda is a trademark of Honda Motor Co., Ltd.
-
Remote steering and shutdown conversion kits for LW11 and LW12 Bale Wrappers
Remote steering and shutdown conversion kits allow the operator to steer and start/stop the wrapper from the operator station of the tractor or from the skid steer that is loading the bales into the wrapper.
-
Light kit for bale wrapper
A conversion kit provides night working lights on LW1166 and LW1266 In-Line Bale Wrappers.
-
Guide rollers conversion kit for LW12 Series Bale Wrappers
This sidehill guide rollers conversion kit prevents bales from sliding off of the rollers when wrapping on hillsides.
-
Adjustable tongue (hitch) folds out of way for easy repositioning of unit
The adjustable tongue (hitch) folds neatly out of the way for wrapping. It is located at the opposite end of where the bales are wrapped.
The adjustable tongue makes moving and repositioning the machine a quick and easy task, saving time and money.
Bale capacity
Square bale size | 0.9x0.9x.1.7 m 3x3x5.5 ft |
Round bale diameter | 1.7 m 5.5 ft |
Controls
Lift mechanism | Optional hydraulic power jack |
Steering | Hydraulic with optional remote control |
Folding tail gate | Hydraulic |
Compacting brakes | Hydraulic adjustable pressure valve |
Type | Electric over hydraulic 12 V |
Power drive | Optional: hydraulic single or dual wheel |
Hydraulic system | Self-contained |
Dimensions
Overall machine shipping length | 5 m 16.4 ft |
Overall machine width | 2.7 m 9 ft |
Overall machine length | 7.7 m 25.4 ft |
Overall machine height | 2.7 m 9 ft |
Final bale push off
Bale pusher | Self-contained scissor linkage |
Unloading | Manual cross tube |
Hitch
Length | Adjustable |
Type | Folding |
Lighting, marking and safety
Safety tow chain | Standard |
Jack | Standard |
Markings | SMV and reflectors |
Transport safety lights | Standard |
Power
Engine size | 9.7 kW 13 hp |
Start type | Electric |
Engine type | Honda |
Alternator size, amp | 18 amp |
Set-up time
Labor hours | 1 |
Tires
Size (front) | 11L-15 Implement |
Quantity | Four (two front, two rear) |
Size (rear) | 11L-15 Implement |
Warranty
Machine | 1 year |
Weight
Towing unit minimum weight | 1,587.6 kg 3,500 lb |
Weight | 2,381.4 kg 5,250 lb |
Wrapping
Wrapping capacity | 120 bales per hour |
Bale alignment | Adjustable bale guides |
Cycle time | Adjustable with limit switches |
Bale guide rollers | Optional |
Film tensioners | Two aluminum rollers: 76.2 cm 30 in. with stretch: 55 percent |
Hoop speed | Adjustable flow control valve |