LW11 Series In-Line Bale Wrapper
- John Deere
- Handling Equipment (Hay & Forage)
Find Your Nearest Location
Key Features & Specs
- Bale push is integrated into machine
- Wrapping cycle shuts down when out of film
- 120 bales per hour
- Central control box operates all hydraulic functions
- Wrapping Capacity 120 bales / hr
- Bale Capacity 5 ft. 6 in. (1.7 m) round
- Power 13 hp (9.7 kW)
- + Expand All
- - Close All
-
Adjustable tongue (hitch) folds out of way for easy repositioning of unit
The adjustable tongue (hitch) folds neatly out of the way for wrapping. It is located at the opposite end of where the bales are wrapped.
The adjustable tongue makes moving and repositioning the machine a quick and easy task, saving time and money.
-
Remote steering and shutdown conversion kits for LW11 and LW12 Bale Wrappers
Remote steering and shutdown conversion kits allow the operator to steer and start/stop the wrapper from the operator station of the tractor or from the skid steer that is loading the bales into the wrapper.
-
Control box and levers are control center of machine
The control box and levers are the control center of the in-line bale wrappers.
Some of the uses include turning the unit on and off, and controlling the bale ramp and bale push.
-
Options available to increase productivity and uptime
14.9-kW (20-hp) Honda® engine
A larger horsepower engine with a high-flow pump provides increased capacity to complete the job faster.
NOTE: LW Series In-Line Bale Wrappers come standard with a 9.7-kW (13-hp) Honda engine.Single- and dual-power drive
Optional single- or dual-power drives allow the operator to maneuver the unit without attaching it to a tractor. The single-power drive has one rear tire, while the dual-power drive has two rear tires, to provide traction for the unit. These features are great for wet or uneven ground conditions where traction is limited.
Steering remote control
This remote control allows the operator to steer, start, and stop the machine without using the control panel on the machine.
Twin wrap kit
This kit provides a double layer of wrap, increasing the amount of wrap applied to the bales.
Bale follower
The bale follower allows the in-line wrapper to automatically follow the line of bales next to it.
Work lights
For early morning or late-night work, choose between two optional work lights: light-emitting diode (LED) and halogen.
Honda is a trademark of Honda Motor Co., Ltd.
-
Wheel conversion kits for LW11 and LW12 Bale Wrappers
The first kit listed is a dual-wheel hydraulic power drive conversion kit that allows the wrapper to be driven and powered by its own hydraulic system. Dual drive improves traction in wet and slick conditions.
The second kit listed is a single-wheel hydraulic power drive conversion kit that allows the wrapper to be driven and powered by its own hydraulic system. One rear tire is hydraulically driven.
-
Film wrap sensor shuts down wrapping cycle when out of film
The film wrap sensor automatically shuts down the wrapping cycle when the machine runs out of film or breaks.
-
Traction implement tires great on wet and uneven terrain
Traction implement tires make the in-line wrappers sure-footed on wet and uneven terrain to help get the machine where it needs to be for wrapping bales.
The LW11 Series comes standard with the traction implement tires, and they are available on the LW12 Series only when ordered with single- or dual-power drive.
-
Light kit for bale wrapper
A conversion kit provides night working lights on LW1166 and LW1266 In-Line Bale Wrappers.
-
Bale push is integrated into machine
The bale push moves the bale to the back of the bale wrapper. From this point, the operator can utilize the optional bale push-off arm to finish the process. The operator moves a lever to extend the arm, and the arm pushes the bale off onto the ground.
Bale capacity
Round bale diameter | 1.7 m 5.5 ft |
Controls
Lift mechanism | Hydraulic rear axle rotation |
Steering | Hydraulic with optional remote control |
Power drive | Optional, hydraulic single or dual wheel |
Type | Electric over hydraulic 12 V |
Hydraulic system | Self-contained |
Dimensions
Overall machine shipping length | 5 m 16.4 ft |
Overall machine width | 2.7 m 9 ft |
Overall machine length | 5.5 m 18 ft |
Overall machine height | 2.7 m 9 ft |
Final bale push off
Bale pusher | Self-contained scissor linkage |
Unloading | Manual cross tube |
Hitch
Length | Adjustable |
Type | Folding |
Lighting, marking and safety
Safety tow chain | Standard |
Jack | Standard |
Markings | SMV and reflectors |
Transport safety lights | Standard |
Power
Engine size | 9.7 kW 13 hp |
Start type | Electric |
Engine type | Honda |
Alternator size, amp | 18 amp |
Set-up time
Labor hours | 1 |
Tires
Size (rear) | 27x10.5 Traction |
Size (front) | 11L-15 Implement |
Quantity | Four (two front, two rear) |
Warranty
Machine | 1 year |
Weight
Towing unit minimum weight | 1,511.8 kg 3,333 lb |
Weight | 2,268 kg 5,000 lb |
Wrapping
Bale guide rollers | Two standard |
Wrapping capacity | 120 bales per hour |
Bale alignment | Fixed bale guides |
Cycle time | Adjustable with limit switches |
Film tensioners | Two aluminum rollers: 76.2 cm 30 in. with stretch: 55 percent |
Hoop speed | Adjustable flow control valve |