Key Features & Specs
- High capacity, high performance 2.2 m wide precutter
- Wide hydraulic drop-floor clears even the worst blockage with ease
- 3 powered fixed rolls and 2 large diameter belt driving rolls inside the chamber
- PTO (minimum) 155 hp (115 kw)
- Feeder Type MaxiCut HC 25
- Bale Width 48 in. (121 cm)
- Drive Line PTO Speed 1000 RPM base / MaxiCut HC 25
- Bale Diameter 60 in. (152 cm)
- Bale Chamber Type 2 Endless belts – 1.9 ft. (573 mm) width + 2 front-powered rolls + 1 powered starter roll
Specifications
Bale
Size | Diameter 0.8 to 1.6 m 2.6 to 5.25 ft Width 1.21 m 3.97 ft |
Bale forming
Bale size indication | Monitor |
Density control | Density and diameter fully controlled from the monitor |
Forming chamber | Variable - two endless belts + two front rolls + starter roll |
Baler
Base weight | 6803 kg 15,000 lb |
Width | With narrowest tires - 2.83 m 9.3 ft With widest tires - 3.29 m 10.79 ft |
Length | 763.4 cm 300.55 in. |
Height | 321.9 cm 126.75 in. |
Driveline
Drive protection | Cam clutch |
PTO lockback collar on tractor hookup | Yes |
PTO 60-degree free rotation | Yes |
PTO speed | 540 or 1000 rpm |
Key Specs
Density control | Density and diameter fully controlled from the monitor |
Bale size indication | Monitor |
Regular pickup - Bars | Five |
Belts-other - width | Two endless belts |
Monitor
Bale forming | Yes |
Gate closed | Yes |
Full bale | Yes |
Auto wrap | Yes |
Oversize bale | Yes |
Bale size | Yes |
Near full bale | Yes |
Monitor console for tractor | ISOBUS |
Regular pickup
Gauge wheels | Fixed or castor action |
Lift control | Hydraulic |
Bars | Five |
Drive | Cam track |
Width | 2.2 m 7.2 ft |
Knives | Dual bank 12 & 13 knife, Total 25 knife |
Type | MaxiCut™ precutter pickup/25 knives |
Tire size
Optional | 500/45-22.5 tandem 620/40R22.5 tandem |
Tractor Requirements
Hydraulic SCV valves | Power beyond is preferred but not mandatory |
Minimum PTO | 90 kW 120 hp |
Wrapping system
Wrapper | Poly film |
Control | From monitor |
Bale chamber | Net system on front of baler |
Additional information
Date collected | 9 August 2019 |
Maintenance chains | Automatic chain lubrication is standard Bearings greasing - automatic greasing system (tank) |