- 15 ft. cutting width
- 540 or 1000 PTO RPM
- Rear wheel torsional suspension with sealed bearings
- New frontal suspension and swivel hitch options
Specifications
Blades
Type | Suction |
Blade holder | Type Round stump jumper and standard deck rings for maximum protection of blades and blade carrier against obstruction damage Option of double blade bar for extra shredding |
Width | 102 mm 4 in. |
Overlap | 152 mm 6 in. |
Thickness | 13 mm 0.5 in. |
Blade tip speed | 540 RPM 79.2 m/s 259.8 fps 1000 RPM 80.5 m/s 284 fps |
Capacity
Cutting width | 4.6 m 15 ft |
Cutting capacity (diameter) | 101.6 mm 4 in. with hammer blade: 127 mm 5 in. |
Cutting height | 25.4-406.4 mm 1-16 in. |
Cutting chamber depth | 254 mm 10 in. |
Dimensions
Deck type | Single dome deck |
Transport width | 9.1 ft (2.8 m) at wing wheels |
Deck shape | Easy-clean dome-shaped top deck |
Hinges | Intermittent cast steel segments - maintenance-free single 2.5-cm (1-in.) diameter full-length hinge pin |
Overall length | 5.3 m 17.3 ft |
Approx. weight | 2838 kg 6258 lb |
Shirt thickness | 3 gauge - 6 mm 0.24 in. |
Deck thickness | 7 gauge - 4.55 mm 0.18 in. |
Overall width | 4.7 m 15.4 ft |
Drivelines
Size | Main CV ASAE Category 6, splined telescoping profiles Connecting ASAE Category 5, splined telescoping profiles |
Protection | Connecting No-seize, slip-clutch driveline |
Gearcases
Number | 4 |
HP rating | Transfer Continuous: 186 kW 250 hp Peak : 224 kW 300 hp Center Continuous: 93 kW 125 hp Peak: 168 kW 225 hp Outer Continuous: 93 kW 125 hp Peak: 168 kW 225 hp |
Hitch
Jackstand | Mechanical jackstand in base for all machines. Hydraulically operated height, stays vertical while raising/lowering. |
Type | Standard self-level hitch clevis with 57.2-cm (22.5-in.) narrow-profile width Ball-type self-level hitch with 57.2-cm (22.5-in.) narrow-profile width and 2-degree rotation freedom to each side Swivel hitch |
Hydraulics
Wing lift | Independent; includes spring assist unfolding |
Wing flex | For transport: upward 90 degree (angle) Working angles: upward 45 degree (angle) downward 22 degree (angle) |
Key Specs
Transport width | 9.1 ft (2.8 m) at wing wheels |
Drivelines - Size - Main | CV ASAE Category 6, splined telescoping profiles |
Gearboxes | Five years |
Approx. weight | 2838 kg 6258 lb |
Cutting capacity (diameter) | 101.6 mm 4 in. with hammer blade: 127 mm 5 in. |
Deck thickness - upper - lower | 7 gauge - 4.55 mm 0.18 in. |
Shirt thickness | 3 gauge - 6 mm 0.24 in. |
Cutting width | 4.6 m 15 ft |
Blade tip speed - 540 rpm - 1000 rpm | 87.8 m/s 288 fps |
Tractor PTO HP range | 41 kW 55 hp |
Shielding
Rear | Single-row chain guard Optional: double row |
Front | Single-row chain guard Optional: double row |
Tractor compatibility
Tractor PTO | 540 or 1,000 rpm |
Tractor PTO HP range | 41 kW 55 hp |
Warranty
Gearboxes | Five years |
Wheels
Row width adjustment | Yes |
Suspension | Torsional suspension |
Wing-leveling adjustment | Easy adjust turnbuckle with bearing |
Type | Option 1 Sealed bearing on hubs 5-bolt, laminated: 21x5.25x9 Option 2 5-bolt, 24PR severe-duty ag): 26x9x14.5 5-bolt, 24PR severe-duty ag foam filled: 26x9x14.5 |