John Deere flex-wing rotary cutters lead the way with innovative design, superior durability, and proven performance. Valuable features are included such as a dome-shaped smooth deck, which prevent water and debris from accumulating on the top of the machine and makes it easy to clean up.
Built with a superior structural design that will satisfy different applications and segment desires, the single deck on the flex-wing cutters adds volume on the cutting chamber, allowing the machine to process more material and translating into an improvement in cut quality. The cutting chamber design allows the material to flow through the area and be discharged evenly throughout the width of the machine.
To help promote safe operation, John Deere rotary cutters are equipped with front and rear safety-chain shields and lighting kits to comply with U.S. regulations. John Deere rotary cutters continue to advance in value with larger, more powerful gearboxes, and updated constant-velocity (CV) drivelines.
Here are situations when a rotary cutter provides value:
Clipping pastures encourages grass growth, optimizing on valuable pasture acreage.
Cutting grass and stalks helps control insects.
Routine cutting keeps weeds from reseeding.
It is the most cost efficient way to cut roadsides, parks, cemeteries, airport fields, hydro, gas, and telephone easements, and all other types of open properties.
Cutting grass waterways encourages root development and helps prevent erosion.
Knocking down stalks such as cotton, corn, or milo speeds up decomposition. This is essential in no-till and minimum-till fields.
Clearing out brush is easy.
Control undergrowth and grass in orchards, vineyards, and groves.
Decide what model to use based on:
The size of the area to mow versus the size of the machine – the bigger the area to mow, the bigger the mower needs to be in order to be efficient during mowing hours.
The amount of time and frequency it will be used – for longer hours and more frequency, choose a heavier duty machine.
Tractor compatibility – if there is a tractor the operator will be using, look for the tractor compatibility sheet to identify appropriate options.
Choose the right features to satisfy specific needs – check out the value and benefits for each option to determine which one is the best fit for the work
John Deere flex-wing rotary cutters are available in three duty-level categories and four width sizes.
E-spec
Sizes: 3.7-m (12-ft) and 4.6-m (15-ft)
E-spec models cut brush up to 50.8 mm (2 in.) in diameter
Two tire options to choose from
Available in 540 rpm
Tractor compatibility – see chart
Great choice for the property owners with light-duty applications
M-spec
Sizes: 4.6-m (15-ft) and 6.1-m (20-ft)
M-spec models cut brush up to 76.2 mm (3 in.) in diameter
Includes additional options to satisfy most customer needs
Available in 540 or 1000 rpm
Good match for medium-duty customers and their versatile jobs
R-spec
Sizes: 3.05-m (10-ft), 4.6-m (15-ft), and 6.1-m (20-ft)
R-spec models cut brush up to 101.6 mm (4 in.) in diameter
Available in 540 or 1000 rpm (R10 only available in 540 rpm)
Excellent for road side mowing and more demanding applications
John Deere flex-wing rotary cutters are equipped with a single dome deck to allow material debris and water to be easily removed from the top of the machine.
Dome shape – clean top deck
R-spec machines
R-spec machines come standard with these features that will reduce overall maintenance time.
Maintenance-free bushings
Sealed hinges
There is no need for greasing, as the machine includes internal pre-greased bushings and sealed hinges.
Back torsional suspension
Torsional suspension
This requires minimal maintenance; operators only need to check that bolts are tightened every 40 hours.
John Deere flex-wing rotary cutters are equipped with chains and lights as standard in all models.
Front and rear safety chains
Front safety chains
Chain shields offer protection to the operator and the area surrounding the cutter, yet allows uncut material to pass into the cutting chamber with minimal restriction.
Optional double-row chains for R-spec models
Lighting kit
Lighting kit
Lights are required for U.S. regulations on implements wider than 3.05 m (10 ft). All cutters come standard from the factory with lights.
Transport lock
Transport lock on back axle
Transport lock on wings
Always use the transport lock on the wings and back axle while transporting or moving the machine.
Blades
Type
Suction
Thickness
13 mm 0.5 in.
Blade tip speed
540 RPM 86.6 m/s 284.1 fps
Blade holder
Type Round stump jumper for maximum protection for blade carrier against obstruction damage
Width
102 mm 4 in.
Overlap
152 mm 6 in.
Capacity
Cutting chamber depth
254 mm 10 in.
Cutting capacity (diameter)
50.8 mm 2 in.
Cutting height
25.4-406.4 mm 1-16 in.
Cutting width
4.6 m 15 ft
Dimensions
Hinges
Intermittent cast steel segments - greaseable single 2.5-cm (1-in.) diameter full-length hinge pin
Transfer Continuous: 186 kW 250 hp Peak: 224 kW 300 hp Center Continuous: 56 kW 75 hp Peak: 75 kW 100 hp Outer Continuous: 56 kW 75 hp Peak: 75 kW 100 hp
Hitch
Type
Standard self-level hitch clevis with 57.2-cm (22.5-in.) narrow-profile width
Jackstand
Mechanical jackstand in base for all machines. Hydraulically operated height, stays vertical while raising/lowering.
Hydraulics
Wing lift
Simultaneous
Wing flex
For transport: upward 90 degree (angle) Working angles: upward 45 degree (angle) downward 22 degree (angle)
Fill out this form to request a quote. A representative will get in touch with you as soon as possible.
Thank you for submitting.
Request Service
Fill out our request form to contact us about service.
Thank you for submitting.
Request Parts
Fill out our request form to contact us about parts.
Thank you for submitting.
Request Used Parts
Fill out our request form to contact us about used parts.
Thank you for submitting.
Request Rental
Fill out our request form to contact us about rentals.
Thank you for submitting.
Contact us about Precision Ag
Fill out our request form to contact us about precision ag technology.
Thank you for submitting.
Contact us
Fill out our contact form and a representative will be back in touch with you soon.
Thank you for submitting.
Learn More About Our Service Programs
Thank you for submitting.
Send us your feedback
We'd love to hear your feedback! Please fill out the form below to share.
Thank you for submitting.
Body Shop
Fill out this form to get in contact with our body shop. A representative will get in touch with you as soon as possible.
Thank you for submitting.
Papé Technician Training Program Interest Application
Thank you for submitting.
Technician Application
Thank you for submitting.
Events, Donations and Sponsorships
Thank you for submitting.
Join The Papé Team
Fill out our career form and a representative will be back in touch with you soon.
Thank you for submitting.
Contact us
Fill out our contact form and a representative will be back in touch with you soon.
Thank you for submitting.
Thank you for coming in, you are important to us! Please fill in your information below and one of our members will help you as soon as we can.
Thank you for submitting.
Thank you for your interest in electrification, you are important to us! Please fill in your information below and one of our members will reach out to you as soon as we can.
Thank you for submitting.
Giveaway Submission
Thank you for submitting.
Vaccination Status Survey
Thank you for submitting.
General Newsletter
Thank you for submitting.
Hawaii Newsletter
Thank you for submitting.
Request Dealer Transfer
Thank you for submitting.
Contact us
Fill out our contact form and a representative will be back in touch with you soon.
Thank you for submitting.
Thank you for your interest in upgrading to a premium John Deere compact utility tractor. Please fill in your information below and a Papé Machinery member will contact you shortly.