John Deere 25A

25A Flail Mower

  • John Deere
  • Flail Mowers and Shredders

Find Your Nearest Location

Find Location
Your Preferred Store
Change location Change location
Request Quote
Key Features & Specs
  • Adjustable cutting height
  • Uses a heavy-duty gearbox with a rating of 65 hp
  • Compatible with any Category 1 3-point hitch
  • Cutting Width 6 ft. 6 in. (1.98 m)
  • PTO HP 30 – 75 hp (22 – 56 kW)
  • Hitch Category Cat. 1 & Cat. 2
  • + Expand All
  • - Close All
  • Power take-off (PTO) drive shaft and gearbox
    Heavy-duty gearbox
    Heavy-duty gearbox
    PTO drive shaft
    PTO drive shaft

    All mowers use a heavy-duty gearbox with a continuous rating of 65 hp.

     

    The power is transmitted through fully shielded, telescoping drive shafts with quick-attach and detach characteristics for easy hookup.

  • Tractor hookup
    Tractor hookup
    Tractor hookup
    #

    The 25A hitch is now compatible with any Category 1 3-point hitch (with or without the iMatch™ Quick-Coupler system).

     

    iMatch compatibility starts with serial number 644700.

  • 36 flail-knife rotor provides uniform distribution of pulverized material
    Rotor and knives
    Rotor and knives
    #

    A three-bank, counterbalanced rotor is equipped with 36 individually replaceable knives:

    • Rotor revolves at 1850 rpm to produce a 152.9-km/h (95-mph) blade-tip speed for a clean cut.
    • Knives are arranged on the rotor to provide uniform distribution of material across the full cutting width.
    • Knives pivot at their mounting points to minimize damage if an obstruction is hit.
  • Adjustable cutting height
    Roller
    Roller
    #

    The roller can be set at four different cutting heights, from 1.3 cm to 12.7 cm (1/2 in. to 5 in.) The tractor's 3-point hitch upper link is used to regulate the cutting height between these positions.

3-Point Hitch

Quick-coupler compatible Yes (Category 1 and 2)